Pivot Hinges

 Home Page

 Order Form

 Hardware Index

 HJC-380L...$4.65 Pair for Bronze Plated Through the Door Pivot Hinges. Opens 270º with 5/8" Thick Door. Opens 255º with 3/4" Thick Door. Extra Heavy Steel for Heavy Doors. Semi invisible, only the tip shows. Cut an angled 7/32" slot through the door. Paired left and rights

 

  H-704U...$2.25 each, not sold in pairs. 10 for $1.50 per hinge. 500 hinges for $1.15 per hinge. Concealed Pivot Hinge for Flush Doors Removable. Die Cast Metal Mounting plates fasten to top and bottom of door back, Pivot section fastens to plate with machine screw.No machining of the wood, just a hole for the nylon bushing. Adjust 3/16" side-to-side and 1/8" front-to-back. Nickel Plated, Un-handed.

 

  HT-57S...$1.95 each, not sold in pairs. 10 for $1.35 per hinge. 500 hinges for .95 cents per hinge. Concealed Pivot Hinge for Flush Doors Steel pivot hinge, black oxidized, with 9mm nylon pivot bushing. Handed lefts & rights for top and bottom mounting. Horizontal adjustability.

 

  HT-57/32S....$2.25 each, not sold in pairs. 10 for $1.65 per hinge. 500 hinges for $1.05 cents per hinge. Concealed Pivot Hinge for Flush Doors Steel pivot hinge, black oxidized, with 9mm nylon pivot bushing. Handed lefts & rights for top and bottom mounting. Horizontal adjustability. Screws holes are on 32mm centers on this item.

 
H-273L..$4.35 pair
Angled Pivot Hinges, riveted only. For top and bottom mounting. Steel, statuary bronze finish. 2-1/4" long. 3 holes for #5 screws not included.

 
H-1595TPL..$2.80 pair
Right Angle Deep Inset Hinges, permit doors to be set-back and swing clear of corner post. Statuary Bronze. "A" 3/4" "B"1-1/2"

 

 
H-163L..$2.95 pair
Right Angle Deep Inset Hinges, permit doors to be set-back and swing clear of corner post. Statuary Bronze Finish. "A"1--1/8"B"1-3/4"

 

 
H-160/2L..$2.95 each
Center Pivoting 2" Hinge for revolving doors, top mount, steel with bronze finish. Sold singly with stamped socket. . Uses #4 Screws

 

 Pivot Hinge Statuary Bronze Finish
AS-1721....discontinued pair left & right

 

 
H-602 L ..$2.95 each
Rear Pivoting Hinge , mounts on back of door. 2" long with vertical adjustment slot, Steel Statuary Bronze. Sold singly with stamped socket. . Uses #4 Screws

 

  AS-1681...$2.95 ea. Center Hinge with plain socket. Statuary Bronze Finish
 2" long & 3/8" wide. Pin 5/16" long x 1/4" diameter
 Mounts on top or bottom of door and will not show when installed.

 

  H-273BGTL...$6.95 per pair. Pivot Door Hinge with all screws going into solid wood, avoiding end grain splitting. Case member is 2" long while bracket for door is 1-1/8" wide x 1-1/2" long. Steel Statuary Bronze. Sold in pairs. Holes for # 5 screws.

 H-20916L (#4)...$1.85 Each Bronze Finish Through the Door Spring Hinge. Self Closing, Self Locking hinge of case hardened steel. Adjustment holes in door and cabinet sides. Self locating tabs. May be used in slot through the door or on top and bottom. A= 1-3/16" B= 1-1/8"

  HIP-90053D....$4.00 a pair Bronze finished Steel Top & Bottom 270º Pivot Hinge. Extra wide throw accomodates up to 1" door. May be used in through the door slot.

 

  
 HSG-351L....$3.50 a pair Bronze finished Steel Top & Bottom Pivot Hinge. Accomodates up to 1-1/8" door. For Kitchen Cabinets and utility use.
 HSG-351Z....$3.50 a pair Zinc finished Steel Top & Bottom Pivot Hinge. Accomodates up to 1-1/8" door. For Kitchen Cabinets and utility use.