|
In-line Doors Open 180ª An unusual hinge for folding doors that will handle
doors 5/8"-7/8" thick. Also used to extend work surfaces. .045
steel in two finishes In two finishes. |
HUF-805 L ...See
Price and Buy by each Bronze Finish |
HUF-805 Z ...See
Price and Buy by each Zinc Finish |
|
|
Overlay Door Hinge for 270ª Opening.
.045 cold rolled steel hinge for 5/8"
door and 5/8" side panel. For TV cabinets and entertainment units.
In two finishes. |
HUF-808 L ...See
Price and Buy by each Bronze Finish |
HUF-808 Z ...See
Price and Buy by each Zinc Finish |
|
|
HSG-307/04P ......See
Price and Buy by Each Modern Elegance
in brass. A contemporary accent in
a slim-line rugged hinge. Extruded brass in a hand polished finish. Recesses
into edge of door for a sleek look. 270ª
opening for doors 5/8"-7/8" thick. 1-19/32 High. |
|
|
|
H-11527K .....See
Price and Buy by each Drop Panel
Legs for Wall Units. To convert a drop
panel on a wall unit to a table or work surface. Legs pivot 270ª to
lay flush with inside panel ofpanel and are concealed inside cabinet when
panel is raised. .060 steel, chrome
plated. For use with number 6 screws. Accomodates 1" square legs of
wood or steel. (Screws not included) |
|
|
Folding Door Hinge For Folding wardrobe or chest doors. May be flush mounted into
a hole 1/16" deep x 30mm diameter drilled 6mm off center. May also
be surface mounted. without machining. Uses
#6 or #7 flat head countersunk screws. Open
size: 1-15/16" long x 13/16" wide (49mm x 30mm) 3 Finishes available,
screws not included |
H-200130 L ......See
Price and Buy (Bronze Finish) |
H-200130 N .......See
Price and Buy (Nickel Finish) |
H-200130 P .......See
Price and Buy (Brass Finish) |
|
|
H-19034N ......See
Price and Buy by Each Strut Hinge
in Nickel Plate. A specialty hinge
for tool boxes and chest. Double Thickness .042 guage steel. 3/4" Wide, Long leaf is 2" Long, Short
Leaf is 1-3/4" Long. Uses #6 Round Head Screws not included |
|
H-466 |
Rising Butt Hinge, Great for those problem
doors. Brass Plated .125" cold
rolled steel, 4" long x 3" wide. Raises the door over uneven floors or carpeting. Eliminates scraping
at bottom. Pitch of hinge makes door easy to close. Both hinges on door
must be pitched the same. Illustration
shows Right Handed Pitch. |
|
H-466 4LHP ....See
Price and Buy by each Brass Plated Left Hand Pitch (2 are needed per
door) |
H-466 4RHP ....See
Price and Buy by each Brass Plated Right Hand Pitch (2 are needed per
door) |