MTCHLTCH |
| The
Original Tutch-Latch The originator of the Push to close, push to open concealed catches eliminates the need for exterior pulls
or knobs. Positions at side, bottom or under shelf. Easy installation with
supplied template. |
| MTCHLTCH-JZ....Zinc Finish....$2.75 each 10 for $2.55 per latch |
| MTCHLTCH-JL....Statuary Bronze....$3.95 each 10 for $2.65 per latch |
|
M-36 FRICT  |
| Double
Nylon Roller Catch Steel
housing in 3 colors with spring activated nylon rollers. Adjustment slots
on both catch and strike. All parts hollow riveted for the most secure assembly.
1-1/4" wide x 5/8" high, body raised 1/8" off ground |
| M-36 FRICT L ...75¢
each or 200 for 45¢ per catch
or 1000 for 30¢ per catch Bronze
Finish |
| M-36 FRICT P 75¢
each or 200 for 45¢ per catch
or 1000 for 30¢ per catch Brass
Finish |
| M-36 FRICT Z ...75¢
each or 200 for 45¢ per catch
or 1000 for 30¢ per catch Zinc
Finish |
|
M-37 FRICT  |
| Double
Nylon Roller HIGH RISE Catch Same as
above except raised to make installation easier for inset doorsSteel housing
in 3 colors with spring activated nylon rollers. Adjustment slots on both
catch and strike. All parts hollow riveted for the most secure assembly.
1-3/4" wide x 7/8" high, body raised 3/8" off ground |
| M-37 FRICT L ...75¢ each or 200 for
45¢ per catch or 1000 for 30¢ per Catch Antique Finish |
|
 |
| Solid
Brass Double Ball Catch Adjustable
tension double spring double ball catches for positive closing action and
secure holding. Extruded brass body and strikes with chrome steel balls. |
| 4 Sizes in Satin Nickel listed below |
| M-240 K...$1.75 each, Call for price
on 100 or more 1-11/16" long,
5/16" wide Nickel |
| M-240 AC...$2.25 each, Call for price
on 100 or more 1-15/16" long,
3/8" wide Nickel |
| M-240 BC...$2.65 each, Call for price
on 100 or more 2-3/8" long, 15/32"
wide Nickel |
| M-240 CC...$3.95 each, Call for price
on 100 or more 2-3/4" long, 1/2"
wide Nickel |
| 4 Sizes in Satin Brass listed below |
| M-240 R...$1.75 each, Call for price
on 100 or more 1-11/16" long,
5/16" wide Brass |
| M-240 AR...$2.25 each, Call for price
on 100 or more 1-15/16" long,
3/8" wide Brass |
| M-240 BR...$2.65 each, Call for price
on 100 or more 2-3/8" long, 15/32"
wide Brass |
| M-240 CR...$3.95 each, Call for price
on 100 or more 2-3/4" long, 1/2"
wide Brass |
|
| RM-270N...85
cents per set of 4 cabinet latches. Includes screws. |
 |
| M-36PW...85 cents per set of 2 self aligning
magnetic catches. Includes screws. |
 |
 |
| Snap-Grip
Kwik-Latch Self aligning gripper catch can raise door up to 5/32" to
maintain alignment and remove stress from the hinges. Push to open! Push
to close! Exclusive snap open feature permits door to open without breaking
if pulled instead of pushed. Functions even when case is out of square due
to built in tolerances. Black Polyethylene. 1-1/16" long x 1-5/8"
wide x 1/2" thick |
| M-9KW S....$4.65 each Call for quote on 50 or more. |
|
 |
| Positive
Closure Friction Catch Positive snap-action that locates as it secures
the door. For Vertical and Horizontal use. Brown Polyethylene standard. |
| M-880B.....75¢ each Call for quote on 50 or more. |
|
MINI-LATCH  |
| MINI-LATCH
Push to close, push to open A diminutive catch offering positive closing with
a push and easy opening with a push. No handles required. May be installed
vertically or horizontally. Case must be level for best operation. 4 way
adjustable. 1-3/4" long x 1-1/16" high x 7/16" thick |
| MINILTCH/BP....Polished Brass wth Brown Nylon....$2.25 each Call for quote
on 100 or more. |
| MINILTCH/WN....Polished Chrome wth White Nylon....$2.25 each Call for quote
on 100 or more. |
|
|
|
MROLLFIX  |
| Nylon
Kitchen Cabinet Roller Catch Strong & silent with spring mounted roller
to engage the strike. White or Brown. Easy to apply, very low cost. Slotted
adjustment holes 13/16" center to center on strike. 11/16" center
to center on catch. |
| MROLLFIX B...Brown....95¢ each
Call for quote on 50 or more. |
| MROLLFIX W...White....95¢ each
Call for quote on 50 or more. |
|
M-5C |
| Spring
mounted roller catch Steel witth spring controlled nylon roller to engage strike. Built
in door stop. Slotted holes on catch and strike for adjustments on 1"
centers. Zinc plated or statuary bronze |
| M-C5 Z...Zinc....95¢ each Call for quote on 50 or more. |
| M-C5 Bronze...95¢ each Call for quote on 50 or more. |
|
|
| Ball
Bearing Catch Positive-action, spring-mounted, ball-bearing for smooth closing
action. Strike has locating prongs. All steel, nickel plated, 3/4"
high x 1-1/8" wide with holes 13/16" center to center |
| M-230N...Nickel....95¢ each
Call for quote on 50 or more. |
|
|
| Rooster
Elbow Catch All steel, spring activated, statuary bronze. Holes on 11/16"
centers |
| M-170L...Bronze....95¢ each
Call for quote on 50 or more. |
|
|
| Insert
Bullet Catch Steel brass plated, spring activated bullet. 2 sizes with strikes
and fixing brads |
| M-12-1/4" P...Brass Plated 1/4" diameter....$1.05 each Call for quote
on 500 or more. |
| M-12-3/8" P...Brass Plated 3/8" diameter....$1.05 each Call for quote
on 100 or more. |
|
