|
K-65100/11.....See
Shopping Cart for Price | Sold per 8 piece set, for
4 corners
Extra heavy corner joints. Heavy guage steel,
wedge action corner jointing for the on-the job- assembly. Interlocking
parts need no machining, attach with screws. For wood parts 4"-8"
wwide, wider units may use two assemblies. The greater the prssure, the
tighter the joint! Disassemble by reversing direction of pressure. Supplied
in set of 8 pieces (4 corners) 7/8" x 7/8" x 3-3/4" long. |
|
|
K-280SM .....See
Shopping Cart for Price | Sold per 8 piece set, for
4 corners$5.65 per 4 piece set, for 2
corners "Small Size" 3/4" x 3/4" x1-1/2"
|
Rapid Corner Joints. Strong corner jointing
where rapid assembly and disassembly are required. For prefabricated sheds,
partitions, shelving, counters, cases etc. Supplied in sets of 2 interlocking
lefts and 2 interlocking rights (2 corners). Lighter use medium grade steel.
Zinc plated finish on .060 steel. 2 SIZES |
|
|
P-1964B .....See
Shopping Cart for Price |
Surface Mounted Corner Connector. No production
machining or drilling! 2- piece nylon connector with locking csrew. Male
section has twin anti-twist locating dowels which mate with holes in the
female. Locking screw through the male fastens into steel nut molded into
female. Assembled size: 5/8" thick, 1/2" long and 1-1/4"
high. Brown. |
|
|
KD-271SMZ .....See
Shopping Cart for Price |
Super Rigid Corner Joiner, for bed rail fastening,
partitions, platform bed frames, plattform bases. Top and bottom tabs on
male section provide lateral rigidity. Incorporated 5/16" captive bolt
provides quick fastening. Heavy corner gussets maintain angular integrity.
.072 guage cold-rolled steel, zinc plated. Screws not included |
|
|
K2541/2W ......See
Shopping Cart for Price |
Nylon Snap-together Joiner. Male and female
take the same boring, 10mm (3/8") diameter x 10mm (3/8") deep.
Rigid attachment. Hard or demse woods do not require gluing. |
|
|
K-418Z ......See
Shopping Cart for Price |
Interlocking Flushmounts. A strong versatile
hanger for wall panels, wall-hung cabinets, mirrors, bed headboard displays.
Two interchangeable interlocking pieces mate perfectly to provide secure
fastening in only 1/8" thickness! Cold rolled .062 guage steel, zinc
plated with 4 screw holes countersunk for #6 flathead screws. 1-1/2"
wide by 1-3/4" high by 1/8" thick assembled. |
|
|
K-2093Z ......See
Shopping Cart for Price |
The Famous Keyhole Fittings, introduced in
1953 and still in demand for their combination of rigidity and ease of assembly/disassembly.
Zinc Plated. Used in assembly of chairs, beds, cabinets etc. Great as the
fit in a narrow application. Screw engages through the keyhole, rides up
the ramps up under pressure, providing a powerful wedge-action tightening.
3-1/2" long x 9/16" wide. 3 countersunk holes for #6 Flat Head
screws. Keyhole fits #10 round head screws |
|
|
K-2094Z ......See
Shopping Cart for Price |
The Famous Keyhole Fittings, introduced in
1953 and still in demand for their combination of rigidity and ease of assembly/disassembly.
Zinc Plated. Used in assembly of chairs, beds, cabinets etc. Great as the
fit in a narrow application. Screw engages through the keyhole, rides up
the ramps up under pressure, providing a powerful wedge-action tightening.
1-5/8" long x 9/16" wide. 3 countersunk holes for #6 Flat Head
screws. Keyhole fits #10 round head screws. |
|
3 Sizes |
Call for case pricing on quantities
of 60. |
K-74/4U .... 4 inches long by 11/16 inches wide.. See
Shopping Cart for Price |
K-74/5U ... 5 inches long by 11/16 inches wide.. See
Shopping Cart for Price |
K-74/6U .. 6 inches long by 11/16 inches wide.. See
Shopping Cart for Price |
Bed Rail Fasteners Extra -heavy .125
guage steel for secure fastening of bedrails to bedpost. Heavy swaged hooks
on male section engage rectangular openings on female. Rigid assembly, quick
disconnect, easy installation.d assembly, quick disconnect,
easy installation. |
|
|
|
|
|
SK-6100S ... "Snap-it" Rigid
Knock Down Panel Connector (and Lid Hinge). An amazing 2-piece snap together
connector that can be assembled and diassembled hundreds of times without
loss of strength or rigidity. Does not require machining and attaches with
only two screws. Unit is approximately 3/4" x 3/4" x 3/4"
when installed. Resist up to 185 lbs. pullout force! Made of special molded
thermoplastic resin resistant to temperature variations, Chemicals and aging.
Lightweight, powerful, economical and easy to install. Can be used horizontally as a lid pivot hinge! Crystalline polyester polymide with a tensile strength of 7300
lbs per square inch. Not affected by temperatures of -40 degrees F or 100+
degrees F! As a pivot hinge, shows no deterioration after 50,00 cycles. See
Shopping Cart for Price |
|
KE-25DISCU-60U..
Disc: 15/16" diameter x 7/16" deep,
Post: 1-3/8" long overall x 1/4" diameter,
machine threaded section 3/8" long, head 3/8" long
Plastic Countersink: 3/8" diameter x 7/16"
long
Brown Plastic Cap 1-1/8" diameter. Set includes one post, cap, and disc. Not 3 disc.
Other Sizes May Be Available upon request.
See Shopping Cart for Price |
|
KE-25DU91...
Includes Disc, Post & Cap.
Disc: 15/16" in diameter. 7/16" deep.
Post: 2" long overall, Head is 9/16"
in diameter, Post is 17/32" in diameter, samll end of post is 3/8"
long.
White plastic cover: 1-3/16" in diameter. See Shopping Cart for Price |
|
K-2020.........
Tapered Connector in 3 size lengths, 2 4 and 6 inches long. One unit consist of a male and female side. Wedge Shaped Fasteners ease the job of hanging or connecting
Flush fixtures, provides an invisible joint of great strength for beds,
chair backs, chair arms, wall-hung cabinet etc. Extra heavy guage cold rolled
steel, only 1/4" thickx 5/8" wide. Easy insertion locks tight
with pressure when bottoming.
See Shopping Cart |
;
(2" Size)
|