SD-8817
Double Acting Mini Slides

|
| Double-Acting Mini Slides 22lbs rating Only 17mm
high x 10mm wide! Precision-rolled steel channels fitted to steel ball-bearings
in a nylon carrier insure a vibration free, smooth-as-silk, rolling action
for lighter drawer loads, desk trays, shelves, computer pullouts. Especially
preferred for drawers with 17mm side grooves. All holes on 32mm centers.
May be attached with wood screws from the outside or with M4 machine screws
from the inside into pre-tapped holes. No Lefts or rights, reversible. May
be used as standard slides or as double acting. Travel exceeds length of
slide. See graph at bottom of this page for general. Eight lengths. |
| DSP-8817/156...$4.25 Per Pair 17mm High x 10mm Wide and 6" Long |
| DSP-8817/187...$4.65 Per Pair 17mm High x 10mm Wide and 7-1/4" Long |
| DSP-8817/219...$5.25 Per Pair 17mm High x 10mm Wide and 8-1/2" Long |
| DSP-8817/251...$5.45 Per Pair 17mm High x 10mm Wide and 9-7/8"Long |
| DSP-8817/283...$6.45 Per Pair 17mm High x 10mm Wide and 11"Long |
| DSP-8817/310...$7.45 Per Pair 17mm High x 10mm Wide and 12-1/4"Long |
| DSP-8817/347...$8.25 Per Pair 17mm High x 10mm Wide and 13-1/2"Long |
| DSP-8817/373...$8.45 Per Pair 17mm High x 10mm Wide and 14-3/4"Long |
Call for price on
50 or more |

To determine the slide
you need, take your old slide and close it so both sides are even. Measure
it. If your slide is 14-3/4" in length then you would pick DSP-8817/373
for the "A" measurement. It is best to use the "A" measurement.
Keep in mind that double acting slides they will actually travel further
than your originals. Lets say your slides are 17" long. If you look
at the chart you don't see a 17" slide but a DSP-8817/373 will work
because the slide is double acting. In this case you mount one side of the
slide to the rear of the drawer side panel and the other side to the front
side panel of the cabinet, so when the drawer is completely close the slides
are not.
Double acting are slides
in which male slides in both directions - from B-C position. Most drawer
slides are closed when both male & female sides are even. They may be
used as double acting or regular slides. |
| "B" is length when male side slides
out of female side. (Drawer Open Position) |
| "A" is length of slide when Male
& Female side are even. (Drawer 1/2 Open Position) |
| "C" is length of slide when Male
slides to the negative postion (Drawer is closed) |
| Reference |
"A" Length (female & male even) |
"B" Length (Drawer Open) |
"C" Length (Drawer Closed) |
Length of Travel |
| DSP-8817/156 |
6" |
3-5/16" |
4-3/4" |
6-1/2" |
| DSP-8817/187 |
7-1/4" |
4-1/8" |
4-9/16" |
8-7/8" |
| DSP-8817/219 |
8-1/2" |
5-1/16" |
5-5/8" |
11-1/2" |
| DSP-8817/251 |
9-3/4" |
6-1/2" |
5-5/8" |
13-7/8" |
| DSP-8817/283 |
11" |
7" |
4" |
16-1/2" |
| DSP-8817/310 |
12-1/4" |
8" |
7-5/16" |
19" |
| DSP-8817/347 |
13-1/2" |
8-3/4" |
8-5/8" |
17-3/8 |
| DSP-8817/373 |
14-3/4 |
9-3/4" |
9-5/8" |
21-1/2" |
| This Chart is to aid in your choosing your
slide, any choice right or wrong is strictly a customers reesponsibility. |
|
DSP-8800 Side Mounting
27mm High Double Acting Slide (Rated at 35lbs)
 |
| DSP-8800 Side Mounting 27mm High Double
Acting Slide (Rated at 35lbs) Screw
holes for side mounting. |
| DSP-8800/277...$7.50 Per Pair 27mm High
(1.06 inches high) 277 mm long (10.9055
inches long) Will fit 11" Drawer
Side |
| DSP-8800/373...$8.60 Per Pair 27mm High
(1.06 inches high) 373 mm long (14.685
inches long Will fit 14-3/4" Drawer
Side |