Tambour Roll, Tape, Glue, Muslin, & Door Lifts

 Home Page

 Hardware Index

Napanee Index 

Horizontal Type Shown Here

Two Horizontal & One Vertical
 SRT-1...See Price and Buy (Horizontal type, rolls up & down) Overall 20"H x 27.3/4" wide
SRT-2...See Price and Buy (Horizontal type, rolls up & down) Overall 20"H x 40" wide
 HRT-1...See Price and Buy (Vertical type, rolls from center to eah side) Each half - 18" H x 20-1/2" wide when installed.

 Tambour Door Tape TW-3..See Price and Buy per foot 3" wide- 100% Cotton- Pre-Shrunk, excellent replacement backing for tambour doors. 3" wide. Use this tape with TG-1 Tambour Glue described below( Minimum Order One foot ) Not Pictured. Order 50 feet or more for 95¢ per foot and save.

 P-130B...See Price and Buy Brass Door Lift 5/8"H x 3 5/16"W 2 3/4" centers. Roll Door Lift

 P-130N..See Price and Buy. Nickel Plated Door Lift 5/8"H x 3 5/16"W 2 3/4" centers Roll Door Lift

 P-127..See Price and Buy

3"long x 3/16"thick x 5/8" proj. Brass. 2-5/8" Centers. Used for tambour roll lift. Screws not included.

 P-127N...Discontinued

 

 BP-75...See Price and Buy

3/4" Bore 1/4" depth, Brass Plated Brass Finger Cup designed to be countersunk in 3/4" diameter hole 1/4" deep.

 

    BP-75N...See Price and Buy

3/4" Bore 1/4" depth, Nickel Plated Brass Finger Cup designed to be countersunk in 3/4" diameter hole 1/4" deep.

 

Roll Door Lift-Brass Plated

BB-27..See Price and Buy Brass Plated Door Lifts Overall- 1 3/8"H x 1 11/16" Wide

Roll Door Lift-Nickel Plated

BB-27N...See Price and buy Nickel Plated Door Lifts Overall- 1 3/8"H x 1 11/16" Wide