Rocker Runners & Platform Rocker Springs

 Home Page

 Hardware Index

 Chair Part Index

Bent Oak Rocker Runners Length measurement straight across tip to tip. Stronger than cut runners, these oak runners are Steam Bent. Sanded - Unfinished - Not Drilled...Sold in pairs only...Measurements are approximate

 

Platform Rocker Springs

 S-5241...See Pricing...Standard- 8 guage-9 turns. Base Plate is 5-1/8" x 3-9/16"

S-5242...See Pricing...Heavy Duty- 7 guage-8 turns. Base Plate is 5-1/8" x 3-1/2"

 

  S-5243...See Pricing...Standard- 8 guage-8 turns Made for Juvenile Rockers. Base is 3-1/4" x 2-1/2"

Curved Rocker Seat

W3-5200..See Pricing Oak face and back. Unfinished. Seat must be shaped & cut to fit your particular rocker. Request or send sketch of formed shaped before ordering to make sure it will fit. We can provide this one curvature only. Our supplier does not have any other shape molds. WE DON NOT CUT AND SHAPE SEATS TO FIT

Bent Oak Rocker Runners Length measurement straight across tip to tip. Stronger than cut runners, these oak runners are Steam Bent. Sanded - Unfinished - Not Drilled...Sold in pairs only...Measurements are approximate
 W3-5230..See Pricing...1 5/16"h x 34 1/4" L x 1 1/8" thick
 W3-5240...See Pricing..1 5/16"h x 34 1/4" L x 1 7/8" thick
 Cut Oak Rocker Runners Length measurement straight across tip to tip. Sanded - Unfinished - Not Drilled...Sold in pairs only...Measurements are approximate
W3-5260...See Pricing..1 3/4"h x 34 1/2" L x 1 1/16" thick
 W3-5270...See Pricing..1 3/4"h x 37" long x 1 9/16" thick