|
Concealed Hinges |
Sold
by each, not pairs, unless otherwise stated |
|
|
Brass Concealed Hinge
B-1791...Click
for shopping cart |
1 3/16" long x 9/16" diameter
(closed) Pictured in partially open
position. |
Installs by drilling holes & inserting
cylinders in holes. Cylinders expand inside hole with a set screw, thus
securing the hinge. |
|
Installation
shown below |
The Original 610 Champ Hinge
6 Sizes
The original No. 610 Champ hinges are back!
The secret is in the wedge-action! Just drill hole and insert! Machined
solid brass with steel linkages Drill mm size holes to exact depth. |
H-610-10P... 10mm Diameter x 7/8"
long for 1/2" wood Click
for Shopping Cart |
H-610-12P... 12mm Diameter x 1-1/16""
long for 5/8" wood. Click
for Shopping Cart |
H-610-14P... 14mm Diameter x 1-3/16""
long for 3/4" wood. Click
for Shopping Cart |
H-610-16P...
16mm Diameter x 1-1/16"" long for 7/8" wood. Click
for Shopping Cart |
H-610-18P... 18mm Diameter x 1-3/8""
long for 1-1/8" wood. Click
for Shopping Cart |
H-610-24P... -1-1/4" to 1-1/2"
5 each 24mm Diameter x 2" long for 1-1/8" wood. Click
for Shopping Cart |
|
|
|
|
Brass Plated Steel Concealed Hinge
Two Sizes
Small Size D-1771...See
Price and Buy. |
A=1 17/32" B=1/2" C=11/16" |
|
Large Size D-1781...See
Price and Buy. |
A=1 3/4" B=1/2" C=11/16" |
Both size hinges require creating a full
mortise for hinge to install. |
|
HC-2000-150N.See
Price and Buy by each not pairs Surface
Mounted Concealed Hinge (150º) door opening,
without drilling holes without using mounting plates. Heavy Duty case-hardened
steel exceeds ANSI-BFMA specifications. 6 way adjustable, lay-on mounting.
Nickel Plated. Request a faxed drawing of mounting example. |
|
|
|
HC-2000MZ...See
Price and Buy by each not pairs Surface
Mounted Concealed Hinge (90º) door opening,
without drilling holes Fully Adjustable! One hinge fits full overlay, half
overlay & inset hinges. Since door opens with flush interior surfaces,
these hinges are ideal for kitchen cabinet doors, electronic access doors
and drop flaps on cabinets. Small in size, proven strongeconomical. Nickel
finish, spring closing. |
|
HC-2000/170 |
HC-2000/170N.......Sold by each Shopping
Cart (Shown Above) Heavy duty hinge exceeding
U.S. ANSI-BFMA specifications by 100%. Smooth, silent, sag-free opening
to 175 degrees without drilling holes and without using base mounted plates.
One type of hinge fits full overlay, half overlay & full inset! Theres
is no inventory duplication. and 45 degree mitered corners are possible!
For normal use, door thickness can be up to 1" but where doors abut
on adjoining cabinets, a maximum of 13/16" is recommended..
Six Way Adjustable, Extra
Heavy duty construction, hardened .082 steel
throughout. Nickel plated and spring closing. |
HC-2000/90N |
HC-2000/90N...
Sold by each Shopping
Cart Up-opening concealed top-lid hinge (90 degree opening) Flush-opening
lift-lid hinge for hampers, chest lids, and piano benches. Surface mounted,
no hole-boring or pre-mounted plates. Steel, nickel plated. 5-3/4"
long by 13/16" wide, Spring Closing. |
H-2010 INOX....Sold
by each not pairs Shopping
Cart Stainless Steel (full mortise) Super Hinge
for Super Doors 180º opening for door
min. 1-1/4" thick with capacity up to 90 lbs. per pound! 3-1/2"
Long with solid links of stainless steel bars. Body of ABS Nylon with Stainless
steel surface. 3D below. |
|
|
|
|
HC-3A7-17N.......See
Price and Buy All Steel Self Closing, Full Inset
Mini Hinge does the job of Big Hinges. A Proven
workhorse on millions of doors in the U.S. Italy, Germany & England,
this is small enough for 5/8" doors and rugged enough for 3/4"
doors in heavy use areas. Six-Way Adjustable.
Depth of cup 11.5mm. (26mm diameter) Application: Screw-on with
wood screws, drive-in with 10mm bushings or Euro-screws for 5mm holes on
32mm systems. Comes with Mounting Plate. |
|
HC-3A7-9N....... See
Price and Buy All Steel Self Closing, Half Overlay
Mini Hinge does the job of Big Hinges. A Proven
workhorse on millions of doors in the U.S. Italy, Germany & England,
this is small enough for 5/8" doors and rugged enough for 3/4"
doors in heavy use areas. Six-Way Adjustable.
Depth of cup 11.5mm. (26mm diameter) Application: Screw-on with
wood screws, drive-in with 10mm bushings or Euro-screws for 5mm holes on
32mm systems. Comes with Mounting Plate. |
|
HC-3A7-0N.....See
Price and Buy All Steel Self Closing, Full Overlay
Mini Hinge does the job of Big Hinges. A Proven
workhorse on millions of doors in the U.S. Italy, Germany & England,
this is small enough for 5/8" doors and rugged enough for 3/4"
doors in heavy use areas. Six-Way Adjustable.
Depth of cup 11.5mm. (26mm diameter) Application: Screw-on with
wood screws, drive-in with 10mm bushings or Euro-screws for 5mm holes on
32mm systems. Comes with Mounting Plate. |
|
HC-3A7-17N....... See
Price and Buy All Steel FREE Closing, Full Inset
Mini Hinge does the job of Big Hinges. A Proven
workhorse on millions of doors in the U.S. Italy, Germany & England,
this is small enough for 5/8" doors and rugged enough for 3/4"
doors in heavy use areas. Six-Way Adjustable.
Depth of cup 11.5mm. (26mm diameter) Application: Screw-on with
wood screws, drive-in with 10mm bushings or Euro-screws for 5mm holes on
32mm systems. Comes with Mounting Plate. |
|
H-993240N...See
Price and Buy 170º
Self Closing Full Overlay Hinge in Nickel H993240N (HB2AQ2)
2mmClip-on base plate included. Full Inset
and Half Overlay Version of hinge can be special ordered. |
|
H-993480N...See
Price and Buy 110º Slide On Self-Closing
Full Overlay Hinge, includes mounting plate HB20FZ2, 2mm.
Slide-On Hinge Plate Full Inset and Half Overlay
Version of hinge can be special ordered. |