Push Button Latch
| B-1407......................$9.95 each |
| Pull 3 13/16"h x 11/16" w Designed to go through cabinet door
and used as a push button latch. Cast Brass |
| Matching Keyhole Pull B-0211 |
| Matching Pull B-0221 |
|
 |
See this type handle
without push button. |
|
Push Button Latch
| EP-7...........$8.95 each |
| Pull 3 1/4"h x 3/4" w Designed to go through cabinet door and
used as a push button latch Fits doors5/8" - 1-1/4" Thick. Cast
Brass |
|
 |
Push Button Knob
| KP-5...........$8.95 each |
| Designed to go through cabinet door and used as a push button Fits doors
1/4" - 3/4" thick. Cast Brass. Knob Base measures 1-3/16"
x 1-5/16" |
|
 |
Push Button Knob
| KP-6..........$8.95 each |
| Designed to go through cabinet door and used as a push button Fits doors
1/4" - 3/4" thick. Cast Brass. Knob is 1-18" in diameter.Oval
Base measures 1-1/2" x 5/8" |
|
|
| TR-B4053P..........$11.95 each |
| Solid Brass Sliding Latch. Base plate on knob side is 2-13/16" high
x 1-1/4" wide, Screw holes 1-3/4" center to center. Catch is 1-15/16"
high x 3/8" wide, screw holes are 1" center to center. Old /New
Stock 30-40 years old. Screws not included. |
|
 |
| TR-B4505P..........$11.95 each |
| Solid Brass Sliding Latch. Base plate on knob side is 3-7/16" high
x 1-1/8" wide, Screw holes 2-1/16" center to center. Catch is
1-15/16" high x 1/2" wide, screw holes are 1-3/16" center
to center. Old /New Stock 30-40 years old. Screws not included. |
|
|
| TR-B5603P..........$11.95 each |
| Solid Brass Sliding Latch. Base plate on knob side is 4-1/4" high
x 2-1/16" wide, Screw holes 2-1/14" center to center x 3/4"
center to center. Catch is 2-7/8" high x 3/4" wide, screw holes
are 1-3/16" center to center. Old /New Stock 30-40 years old. Screws
not included. |
|
 |
Blind Door Bolt Polished
Brass bolt for breakfront and armadio doors. Adjustable tension sliding
action.
X-1791N3P..$21.95 each - 3" long x 1/2"
Wide |
 |
MD-1000Z...$.65 each |
| Bi-Fold Door Hold Back Clip. Eliminate "bounce-back" on bifold
cabinet doors to ensure full visibility for TV picture and to make easy
accessibility to all BiFold Door uses. Nylon Striker with incorporated screw
and spring-steel locking clip. Economical and easy to install. Striker 1/2"
Diameter Steel Clip 1/2" x 9/16" |
|
 
|
Secretary Catch Polished
Brass catch with push button release. 2 SIZES
M-0907P 258..-$26.95 each - 2-5/8" long
x 1-3/8" Wide
DVCL-02344154 -$22.95 each - 2-5/16" long
x 1-5/16" Wide |
 |
Flip Top Table Catch Sanded brass, spring loaded tonque with beveled edge to
automatically engage strike. TWO SIZES.
MO-902158..$23.95 each - 1-5/8" diameter
table top catch in solid brass |
 |
| M-123N...$2.75 each |
| Door Locking Bolt. All steel sliding bolt with easy grip lever to engage
right hand strike. Bolt applies with No. 5 flat head screws and strike applies
with No. 5 round head screws. 2-3/8" long x 7/8" wide, nickel
plated. |
|
 |
| X-5162P...$3.75 each 2" Long Braas Latch |
| X-5163P...$4.75 each 3" Long Braas Latch |
| X-5166P...$6.75 each 6" Long Braas Latch |
| Polished Solid Brass sliding bolts with concealed screw mounting. Packed
with both a universal and non-mortise strike and a rectangular mortise strike.
3/4" wide. 3 lengths listed above. |
|
|
I-14...$19.95 each - Solid Brass Tilt Top
Table Latch 1-3/4"" Diameter. Catch
Plate 1/2" x 1" |
|
BI-45CI...$14.95 each - Cast Iron Cupboard
Latch is great for applications requiring a study antique looking latch.
Flush mounted. Overall Size: 1-3/4" wide
x 1-3/4" high. Catch 1/2" width. |
|
Two Sizes in Brass Plated Steel
| D-1432.........$3.95 each Brass over steel |
| Overall 1-3/4"x1-3/4" CatchOnly 1/2"w |
| D-1442...$3.85 each Brass over steel |
| Overall 2-1/16"Hx2-3/16"W CatchOnly9/16"w |
|
|
| BI-15.........$3.95 each Brass over steel |
| Overall 2-1/4"x2-1/4" Catch only 5/8"wide |
|
 |
| BI-15 N .........$4.50 each Nickel Plated steel |
| Overall 2-1/4"x2-1/4" Catch only 5/8"wide |
|
|
Nickel Plated Steel
| N-1432..............................$5.25 each |
| Overall 1-3/4"x1-3/4" CatchOnly
1/2"w |
|
 |
Stamped Cabinet Latch in Antiqued
Brass Plated Steel
| BI-15AAB..............................$4.25 each |
| Overall 1-3/4"x1-3/4" CatchOnly
1/2"w |
|
|
Stamped Cabinet Latch in Antiqued
Brass Plated Steel
| BI-15AB..............................$4.45 each |
| Overall 2-1/4"x2-1/4" CatchOnly
5/8"w |
|
|
Stamped Cabinet Latch in Antiqued
Copper Plated Steel
| BI-15AAC..............................$4.25 each |
| Overall 1-3/4"x1-3/4" CatchOnly
1/2"w |
|
|
Stamped Cabinet Latch in Antiqued
Copper Plated Steel
| BI-15AC..............................$4.45 each |
| Overall 2-1/4"x2-1/4" CatchOnly
5/8"w |
|
|
Half Mortise latch is flush with
cabinet door surface when installed. Stamped Brass.
| BI-24..............................$9.45 each |
| Overall 3-3/16"x1-1/8" Mortise
depth 1/2" |
|
| I-25ND.........$18.95 each Solid Cast Brass Very Nice piece of
hardware |
| Overall 3-1/4 wide x 1-3/8" high. Catch only 15/16"wide |
|
 |
 |
| B-1438...$9.95 each Solid Brass. Knob turns
to open latch |
| Overall 2-1/8"H x2-3/16"W CatchOnly
2-1/8"H x 5/8" W |
|
|
| BI-32.........$14.95 each Solid Brass, Very Nice piece of hardware |
| Overall 1-3/4 high x 1-3/4" wide. Catch only 1/2"wide |
| BI-30........$15.35 each Solid Brass, Also Very Nice but in a 2"
x 2" size overall. Catch only is 2" x 1/2" |
|
|
| BI-32N.........$15.95 each Nickel Plated Solid Brass Very Nice
piece of hardware |
| Overall 1-3/4 high x 1-3/4" wide. Catch only 1/2"wide |
|
|
| BI-32BN.........$16.95 each Brushed Nickel Plated, Solid Brass
Very Nice piece of hardware |
| Overall 1-3/4 high x 1-3/4" wide. Catch only 1/2"wide |
|
|
| I-24F.........$18.95 each Fancy Solid Brass, Very Nice piece of
hardware |
| Overall 2-1/4 high x 3-1/4" wide. Catch only 1-1/8"wide |
|
|
| I-24ND.........$18.95 each Plain Solid Brass, Very Nice piece of
hardware |
| Overall 2-1/4 high x 2-1/4" wide. Catch only 3/4"wide |
|
Two Sizes |
Both Brass
Plated Steel
| D-1451...............................$1.05 each |
| Bullet 3/8"long x 1/4" diam. Catch 1/2" |
| B-1471...............................$1.15 each |
| Bullet 1/2"long x 3/8" diam. Catch 5/8" |
|
|
| B-1412...........$4.85 each Cast Brass |
| Overall 1 1/4" x 2 3/4"w Catch Only 1"Long |
|
|
| F-1423...$5.95 each Black Finished Steel, Porcelain Knob. Similar design as B-1412 |
| Overall 1-5/16" w x 3"long Catch Only 1-1/8"Long |
|
|
| BI-19CI...$9.45 each Cast Iron Cabinet Latch with Brass Knob |
| Overall 3-1/8" Wide x 1-1/2" High
Catch Width 1-1/8"Wide |
|
|
| BI-20...$9.45 each Cast Brass Cabinet Latch |
| Overall 3-1/4" Wide x 1-1/2" High
Catch Width 1"wide |
|
|
| BI-14...$5.45 each Cast Brass Cabinet Latch |
| Overall 2-3/4" Wide x 1-1/4" High
Catch Width 1"wide |
|
 |
| BP-94...$1.85 each Spring loaded catch for doors without an external
latch. Latch mounts on underside of shelf and catch mounts on inside of
door. Zinc plated steel can be aged. |
|
 |
| BI-13CI..$6.80 each |
| Cast Iron Cabinet Latch with White Porcelain Knob. Overall Size 2-3/4"
long x 1-1/4" high. |
|
|
| K-7A...$7.50 ea |
| 1" diameter Brass Cupboard Turn Knob 8-32 Threaded Shaft with cast
brass latch finger. Set screw adjusts finger. |
|
|
| K-7B...$8.50 ea |
| 1-3/4" diameter Brass Cupboard Turn Knob 8-32 Threaded Shaft with
cast brass latch finger. Set screw adjusts finger. |
|
|
| D-10S...$2.95ea. |
| Cast Brass Latch Finger for cupboard turns 8-32 x 2-3/4" Threaded
Shaft with 1-3/8" x 1-3/8" finger. Set screw adjusts finger. |
|
 |
 |
| W1-1485...............................$4.95 each |
| Hardwood Knob 1 1/4"dia. |
| Shaft 1-1/4"Lx5/16"diam. |
| Catch Only 2 1/4" L x3/4" w x 3/8"
thick. Tapers 3/8" to 1/8" |
| Catch Only W1-1485C............$2.95 ea. |
|
 |
| AD-1480...$.95 each Statuary Bronze |
| Overall 1 1/4" D x 1 1/8" w x 9/16"h |
| Catch 1-1/2" Lx3/8"W x 5/8"
Projection |
|
 |
| B-1453.................................$4.75 each Cast Brass Butterfly
Turn with / Backplate |
| Butterfly Turn 1 1/2" x 1/2" Overall
Diameter 1 7/8" |
| Large Half 1 7/8" h x 1 1/8" w Small
Half 1 13/16"h x 5/8"w |
|
 |
| B-1400...................................$4.95 each Cast Brass
Drop Pull turns shaft with latch seen in the shadow to the left |
| Backplate 3-1/4"high x 1-1/16"wide |
| Drop Pull 1-5/8"high x 15/16"wide |
| Shaft 1 5/8" Long x 1/4" Diameter |
| Catch 1" 1/4"high x 3/8"wide |
|
 NEW
L-5100N |
| L-5100 .........$7.35 each Push button and trim ring in a chrome
finished metal. Body of lock is nylon. Easy to install, fits door thicknes
from 3/4" -7/8" thickness and fits a hole diameter of 1".
Great for boats, rvs and other uses. A quality lock. Shown above in locked
and unlock position. IN STOCK!!! |
SL-9291 |
SL-9291-P for brass finished plastic
button ....$6.95 ea
SL-9291-N for nickel finished plastic
button ....$6.95 ea
Available ABS Plastic with a knob/button,
finished like Polished Brass or Nickel. Push
and the door opens Push again and the door is locked. Tested for long life
Body is 1-7/8" high x 1-3/8"
wide x 3/4" deep. Fastens with 2 #6 Flat head screws. Decorative rosette fits into 20mm (25/32")
hole. Knob screws to latch Steel strike
plate comes in brass finish. |
SL-9291  |
Typical installation shown at left |
