Tambour Doors, Lifts, Pulls | |||
Two Horizontal & One Vertical
| SRT-2...See Price and Buy (Horizontal type, rolls up & down) Overall 20"H x 40" wide. Slats are approximately 3/4" by 1/4" thick |
| SRT-1...See Price and Buy (Horizontal type, rolls up & down) Overall 20"H x 27-3/4" wide. Slats are approximately 3/4" by 1/4" thick |
| HRT-1...See Price and Buy pair (Vertical type, rolls from center to sides) Each half - 18" H x 20-1/2" wide when installed. Slats are approximately 3/4" by 1/4" thick |
Backing Material to make or repair your own Tambour TW-3 tambour strapping material. 3" wide and sold by the foot Use 3 strips or more to do one door. Not Pictured. Requires TG-1 glue to attach.
|
|
| P-130B...See Price and Buy Brass Door Lifts 5/8"H x 3 5/16"W 2 3/4" centers. Sellers Style Roll Door Lift | P-130N..See Price and Buy. Nickel Plated Door Lifts 5/8"H x 3 5/16"W 2 3/4" centers Sellers Style Roll Door Lift |
 |
|
P-127...Discontinuedh 3"long x 3/16"thick x 5/8" proj. Brass. 2-5/8" Centers. Used for tambour roll lift. Screws not included. |
BP-75...See Price and Buy 3/4" Bore 1/4" depth, Brass Plated BrassFinger Cup designed to be countersunk in 3/4" diameter hole 1/4" deep. |
|
|
P-127N...Discontinued
|
BP-75N...See Price and Buy 3/4" Bore 1/4" depth, Nickel Plated Brass Finger Cup designed to be countersunk in 3/4" diameter hole 1/4" deep. |
Roll Door Lift-Brass Plated BB-27B..See Price and Buy Brass Plated Door Lifts Overall- 1 3/8"H x 1 11/16" Wide.
Roll Door Lift-Nickel Plated BB-27N...See Price and Buy Nickel Plated Door Lifts Overall- 1 3/8"H x 1 11/16" Wide.